1. During the production process, the temperature rise of the bearing must be checked frequently. When the temperature rise exceeds 50 degree , the machine should be stopped for inspection to find out the cause and eliminate the fault.
2. When the new machine is running, the transmission belt is easy to stretch, so attention should be paid to adjusting the appropriate tightness of the belt to ensure the working life of the belt.
3. Consumable parts should be inspected frequently and replaced in time to ensure production quality and production volume.
4. The blades and bushings should be checked frequently for wear. If they are worn, the productivity decreases, and the particle size becomes coarser, replace them as soon as they are found to be worn.
5. The main engine and graded flow bearings are all lubricated with grease, using No. 2 special grease with a degree of 265-295.
6. The grease-changing period of the bearing is 2000 hours. The filling amount of grease is 1/2 (upper measurement) or 3/4 (lower measurement) of the space in the bearing cavity. Do not fill too much grease, otherwise it will cause the bearing temperature. Too high.
7. The grease change period of the screw feeder is 4000 hours, and ordinary calcium-based grease should be added.